Chairs glued to wooden sleepers using Turbobond
Turbobond is ideal for gluing flat bottom rail to wooden or plastic sleepers.
Turbobond glues: wood, steel, metals, aluminium, glass, porcelain, ceramics, leather, PVC, ABS, rubber, PMMA, and all common plastics - to themselves and to each other.
Teflon, polyethylene/polyurethane and polypropylene cannot be glued using Turbobond alone, but can be glued using Turbobond Primer followed by Turbobond.
Turbobond is not suitable for cloth or paper.
All polished surfaces, such as glass, marble, etc, should be thoroughly cleaned with Turbobond Clean or acetone.
Porous materials such as wood, leather, ceramics, etc, will require additional drying time. Apply glue, place a weight on the joint or clamp it for a few minutes to set the joint but wait for 20 minutes or so before putting any stress on the joint. To set Turbobond instantly use Turbobond Accelerator first.